Double Coated Acrylics
Product Series	Data Sheet	Data Sheet	Description	Data Sheet
A100		See More	General purpose. Bonds well to HSE plastics, metals, polyester foams & mildly plasticized foam	See More
A175		See More	Permanent/removable. Designed for removability from non-paper substrates	See More
A200		See More	Aggressive acrylic. Bonds well to HSE foams & rubbers as well as ether urethanes with heat assist	See More
A200T		See More	Same as A200 but with a tenslized carrier	See More
A210		See More	Nonwoven carrier. Very high levels of adhesion	See More
A500		See More	Designed for high temperature wrap-around applications	See More
A501		See More	General purpose laminating and fabricating applications. Good balance of tack, peel and shear	See More
A505		See More	Nonwoven carrier. Designed for high temperature wrap-around applications	See More
A601		See More	General purpose laminating and fabricating applications. 2 mil polyester carrier	See More
Double Coated Rubber Adhesives
Product Series	Data Sheet		Description
B93		See More	General Purpose. Same as B95 but with a PP carrier	See More
B95		See More	General Purpose. Excellent adhesion to HSE & LSE foams, plastics, painted metals. 60# Kraft liner	See More
B96		See More	Same as B95 but with 80# liner	See More
B97		See More	Same as B95 but with a board liner	See More
B100		See More	Excellent adhesion to ester urethane foams, LSE plastics & mildly plasticized rubber formulations	See More
B140		See More	Nonwoven carrier. Designed for wrap around applications. Bonds well to talc filled PP	See More
B600		See More	High adhesive mass. PET carrier. For demanding applications	See More
B623		See More	High adhesive mass. For demanding applications. Higher peel values than B600. Non-oriented film carrier	See More
Double Coated Rubber/Acrylic Adhesives
Product Series	Data Sheet		Description
BA150T		See More	Acrylic adhesive on foam side has excellent adhesion to a wide variety of materials. Rubber adhesive	See More
C100		See More	Designed for applications where urethane foam is bonded to PP. Excellent adhesion to esters & ethers	See More
C100-STDFR		See More	Same as C100 but with flame retardant additive in the adhesive	See More
C102		See More	High performance. Designed for applications where urethane foam is bonded to PP, PE, TEO and TPO	See More
C108		See More	Similar to C102 but with lower coat weight of adhesive	See More
C200		See More	Used where a mildly plasticized material or a urethane foam must have an aggressive rubber adhesive for bonding to LSE substrates	See More
C500		See More	For demanding wrap-around applications where high temperature is involved	See More
C501		See More	Similar to C500 but with lower coat weights	See More
C610		See More	Similar to C690B with a lower coat weight on the foam/unwind side. No biocide	See More
C690B		See More	Applications where urethane foams are bonded to PP, PE, TEO & TPO. Contains biocide	See More
Foam Stiffener Adhesives
Product Series	Data Sheet		Description
2119SL			2MIL polyester film coated with a permanent solvent rubber adhesive. Designed to act as a stiffener for urethane foams and sponge rubber. Adhesive is not suited for direct exposure to UV light
2122SL			5MIL polyester film coated with a permanent solvent rubber adhesive. Designed to act as a stiffener for urethane foams and sponge rubber. Also available with a 10MIL polyester. Adhesive is not suited for direct exposure to UV light
2118SL			2MIL polyester film coated with a permanent solvent acrylic adhesive. Designed to act as a stiffener for urethane foams and sponge rubber
2116SL			10MIL polyester film coated with a permanent solvent acrylic adhesive. Designed to act as a stiffener for urethane foams and sponge rubber
Transfer Adhesives
Product Series	Data Sheet		Description
F10-37.5"		See More	Good balance of tack, peel and shear. Not recommended for use on LSE substrates	See More
F5227		See More	4.5MIL low-fogging permanent acrylic designed for adhesion on LSE substrates	See More
DLF-3276		See More	3 mil acrylic. Good for high temperature wrap-around applications	See More
DLF-5276		See More	Same as DLF-3276 but with 4.5 mils of adhesive	See More
F9200		See More	2 mil rubber. Designed for difficult assembly aid wrap applications on LSE plastics	See More
F9500		See More	Same as F9200 but with 5 mils of adhesive	See More
Flocked "Anti-squeak & Rattle" Products
Product Series	Data Sheet		Description
A902		See More	1.0mm black flocked fabric with permanent acrylic. PSA designed to meet all requirements of GM6420M Type 1B, PF-10770, MS-JZ8-22	See More
A904		See More	1.0mm white flocked fabric with permanent acrylic. PSA designed to meet all requirements of GM6420M Type 1B, PF-10770, MS-JZ8-22	See More
A912		See More	1.0mm white flocked fabric with permanent acrylic. PSA designed to meet all requirements of GM3622M Type IV Cycle D & MS-JZ8-22	See More
A915		See More	1.5mm black flocked fabric with permanent acrylic. PSA designed to meet all requirements of ESB-M6G17-A & all specs from A902 series	See More
Miscellaneous Products
Product Series	Data Sheet		Description
DLA-504		See More	High performance product designed for high temperature wrap around applications	See More
DLC-401		See More	High performance product with a high shear rubber on the end user side and a high shear acrylic on the laminating side	See More
DLC-503		See More	Nonwoven supported acrylic-silicone adhesive for laminating to silicone sponge rubbers w/o the use of a flammable primer	See More
B1116-White		See More	Double coated white 1/16" PE foam with rubber adhesive	See More
B1116-Black		See More	Double coated black 1/16" PE foam with rubber adhesive	See More
B1132-White		See More	Double coated white 1/32" PE foam with rubber adhesive	See More
B1132-Black		See More	Double coated black 1/32" PE foam with rubber adhesive	See More